BAHUBALI Alloys is the main supplier of 310S Refractory Anchors. 310S Refractory Anchors is accessible in hex steel framework, exceptional matrix and extended metal. All material is accessible in 310S stainless steel and in addition the majority of the standard grades. Other refractory protection and hard-headed coating items incorporate wire network, extended metal work and hex steel grid.
310S Refractory Anchors and related materials are utilized for tying down and gathering unmanageable artistic fiber linings or for strengthening solid linings of cast capable, plastics or smashing blends. We convey a complete choice of hard-headed grapples. We can supply you with 310S unmanageable stays to suit any profundity of covering. Our obstinate grapple determination incorporates studs, V-cuts, C-cuts, U-cuts and various parts.
Table 1. Composition ranges for 310S Stainless Steel Refractory Anchors
Table 2. Mechanical properties of 310S Stainless Steel Refractory Anchors
|Grade||Tensile Strength (MPa) min||Yield Strength 0.2% Proof (MPa) min||Elongation (% in 50mm) min||Hardness|
|Rockwell B (HR B) max||Brinell (HB) max|
|310S||75 (515)||30 (205)||35||90||198|
|310SH also has a requirement for a grain size of ASTM No 7 or coarser.|
Table 3. Physical properties of 310S Stainless Steel Refractory Anchors
|Density (kg/m3)||Elastic Modulus (GPa)||Mean Coefficient of Thermal Expansion (m/m/0C)||Thermal Conductivity (W/m.K)||Specific Heat 0-1000C (J/kg.K)||Electrical Resistivity (n.m)|
|0-1000C||0-3150C||0-5380C||at 1000C||at 5000C|
Table 4. Grade specifications for 310S Stainless Steel Refractory Anchors
|Grade||UNS No||Old British||Euronorm||Swedish SS||Japanese JIS|
|These comparisons are approximate only. The list is intended as a comparison of functionally similar materials not as a schedule of contractual equivalents. If exact equivalents are needed original specifications must be consulted.|
Table 5. Standard specifications for 310S Stainless Steel Refractory Anchors
|Form||V shape, Y shape and crook anchors but as per clients drawings and requirements.|