Incoloy 825 is a nickel-iron-chromium amalgam with augmentations of molybdenum and copper. This nickel steel combination's synthetic structure is intended to give excellent imperviousness to numerous destructive situations. It is like amalgam 800 yet has enhanced imperviousness to fluid consumption. It has great imperviousness to both lessening and oxidizing acids, to push erosion breaking, and to restricted assault, for example, setting and fissure consumption. Combination 825 is particularly impervious to sulfuric and phosphoric acids. This nickel steel compound is utilized for substance handling, contamination control gear, oil and gas well channeling, atomic fuel reprocessing, corrosive creation, and pickling hardware.
BAHUBALI Alloys are Biggest stockist and supplier of Incoloy 825 (werkstoff nr. 2.4858) Bars & Rods. ASTM / ASME - B 425, SB 425 Bars and Rods.
Table 1. Composition ranges for 825 Incoloy Round Bars
|Incoloy 825||38.0 – 46.0||22.0 min||0.05 max||1.0 max||0.5max||1.5 - 3.0||19.5 - 23.5||0.2 max||0.6 - 1.2||0.015 max|
Table 2. Physical Properties for 825 Incoloy Round Bars
|Grade||Density g/cm3||Melting Point||Tensile Strength (Mpa)||Yield Strength (0.2%Offset)||Elongation|
|825||8.14||1400 °C (2550 °F)||550||220||30%|
Table 3. Grade Specification for 825 Incoloy Round Bars
|Incoloy 825||2.4858||N08825||NCF 825||NFE30C20DUM||NA 16||ЭП703||NiCr21Mo||XH38BT|
Table 4. Standard Specification for 825 Incoloy Round Bars
|Range||5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.|
|Standard||ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B 408.|
|Length||100 mm To 3000 mm Long & Above|
|Finish||Bright, Polish & Black|
|Form||Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.|
|Grade||Incoloy 825 Round Bars– UNS N08825|