Manufacturer of Incoloy 800 Round bars

Incoloy 800, 800H, and 800HT are nickel-iron-chromium compounds with great quality and fabulous imperviousness to oxidation and carburization in high-temperature introduction. These nickel steel composites are indistinguishable with the exception of the larger amount of carbon in amalgam 800H, and the expansion of up to 1.20 percent aluminum and titanium in compound 800HT. Incoloy 800 was the first of these compounds and it was marginally changed into Incoloy 800H. This change was to control carbon (.05-.10%) and grain size to streamline stress break properties. Incoloy 800HT has further changes to the consolidated titanium and aluminum levels (.85-1.20%) to guarantee ideal high temperature properties. The nickel combination is double guaranteed (800H/HT) and consolidates the properties of both structures. Incoloy 800H/HT amalgam was expected for high temperature auxiliary applications. The nickel content makes the combinations exceptionally impervious to both chloride stress-consumption splitting and to embrittlement from precipitation of sigma stage. The general erosion resistance is amazing. In the arrangement toughened condition, amalgams 800H and 800HT have unrivaled crawl and push crack properties. Today, most suppliers just convey the double confirmed 800H/HT composite.

BAHUBALI Alloys are Biggest stockist and supplier of Incoloy 800 (werkstoff nr. 1.4876) / 800H (werkstoff nr. 1.4958 / 1.4876) / 800HT (werkstoff nr. 1.4859 / 1.4876) Bars & Rods. ASTM / ASME - B 408, SB 408 Bars and Rods..


Table 1. Composition ranges for 800 Incoloy Round Bars

Grade Ni Fe C Mn Si Cu Cr Al Ti S
Incoloy 800 30-35 39.5 min 0.01 max 1.5 max 1.0 max 0.75 19-23 0.15-0.60 0.15-0.60 0.015 max

Table 2. Physical Properties for 800 Incoloy Round Bars

Grade Density g/cm3 Melting Point Tensile Strength (Mpa) Yield Strength (0.2%Offset) Elongation
800 7.94 1385 °C (2525 °F) 520 205 30%

Table 3. Grade Specification for 800 Incoloy Round Bars

Incoloy 800 1.4876 N08800 NCF 800 Z8NC32-21 NA 15 ЭИ670 X10NiCrAlTi32-20 XH32T

Table 4. Standard Specification for 800 Incoloy Round Bars

Range 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75.
Standard ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B 408.
Length 100 mm To 3000 mm Long & Above
Finish Bright, Polish & Black
Form Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Grade Incoloy 800 Bars – UNS N08800, Incoloy 800H / HT Rods – UNS N08810

Review Date
Reviewed Product
Author Rating

Our Products

Enquiry Form

Contact form submitted
Featured Products
Contact Us

  Registered Office

  •         47, 2st Carpenter Street
  •         Near C.P. Tank Road,
  •         Mumbai – 400 004,
  •         INDIA
Export Destination

UAE, Bahrain, Italy, Indonesia, Malaysia, United States, Mexico, Chine, Brazil, Peru, Nigeria, Switzerland, Poland, Kuwait, Jordan, Dubai, Thailand (Bangkok), Venezuela, Iran, Germany, UK, Canada, Russia, Turkey, Australia, New Zealand, Sri Lanka, Vietnam, South Africa, Kazakhstan, Saudi Arabia.

  • Phone:- +91-22-6743 7444
  •         Phone:- 6743 8222
  •         Mobile:– +91-99691 20488
  •         Mobile:- +91-098670 71980
  •   Fax No.:- +91-22- 2382 9647
Domestic Supply

Mumbai, Delhi, Bangalore, Hyderabad, Ahmedabad, Chennai, Kolkata, Surat, Pune, Nagpur, Indore, Thane, Bhopal, Visakhapatnam, Vadodra, Nashik, Faridabad, Rajkot, Aurangabad, Ranchi, Coimbatore, Raipur, Mysore, Bhubaneswar, Salem, Bhilai, Bhiwandi, Bikaner, Mangalore, Kochi (Cochin), Bhavnagar, Tirupur, Ankleshwar, Assam, Siliguri

  •   Id:-